LG KU830 User Manual download pdf (Page 20)

Getting started

Turning your handset on

Ensure that your USIM card is in your

handset and the battery is charged. Press

and hold the key until power is on.

Enter the USIM PIN code that was

supplied with your USIM card if PIN code

setting is on. After a few seconds you will

be registered on the network.

Turning your handset off

Press and hold the key until power is

off. There may be a few seconds delay

while the handset powers down.

Do not re-power the handset during this

time.

Access codes

You can use the access codes described

in this section to avoid unauthorized use

of your phone. The access codes (except

PUK and PUK2 codes) can be changed

by using the Change codes feature [Menu

3.6.3].

PIN code (4 to 8 digits)

The PIN (Personal Identification Number)

code protects your USIM card against

unauthorized use. The PIN code is usually

supplied with the USIM card. When the

PIN Code Request is set to Enable, your

phone will request the PIN code every

time it is switched on. When the PIN

Code Request is set to Disable, your

phone connects to the network directly

without the PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some USIM

cards, is required to access functions such

as Fixed Dial Number. These functions are

only available if supported by your USIM

card.

PUK code (4 to 8 digits)

The PUK (PIN Unblocking Key) code is

required to unlock a blocked PIN code.

The PUK code may be supplied with the

USIM card. If not, contact your network

operator’s customer service for the code.

If you lose the code, contact your

network operator’s customer service.

19

_ g

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 96 97

Comments to this Manuals

No comments