LG 55UK6100PVA User Manual download pdf (Page 16)

4

ENGLISH

• Take care not to touch the ventilation openings when watching the

TV for long periods as the ventilation openings may become hot.

This does not aect the operation or performance of the product.

• Periodically examine the cord of your appliance, and if its

appearance indicates damage or deterioration, unplug it,

discontinue use of the appliance, and have the cord replaced with

an exact replacement part by an authorized servicer.

• Prevent dust collecting on the power plug pins or outlet. This may

cause a re hazard.

• Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon.

Pay particular attention to plugs, wall outlets, and the point where

the cord exits the appliance.

• Do not press strongly upon the panel with a hand or sharp object

such as nail, pencil or pen, or make a scratch on it, as it may

causedamage to screen.

• Avoid touching the screen or holding your nger(s) against it for

long periods of time. Doing so may produce some temporary or

permanent distortion/damage to screen.

• As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if you turn o this

unit by SWITCH.

• When unplugging the cable, grab the plug and unplug it, by

pulling at the plug. Don’t pull at the cord to unplug the power cord

from the power board, as this could be hazardous.

• When moving the product, make sure you turn the power o rst.

Then, unplug the power cables, antenna cables and all connecting

cables.

The TV set or power cord may be damaged, which may create a re

hazard or cause electric shock.

• When moving or unpacking the product, work in pairs because the

product is heavy. Otherwise, this may result in injury.

• Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

• Do not use high voltage electrical goods near the TV (e.g. electric

mosquito-swatter). This may result in product malfunction.

• When cleaning the product and its components, unplug the power

rst and wipe it with a soft cloth. Applying excessive force may

cause scratches or discolouration. Do not spray with water or wipe

with a wet cloth. Do not clean your TV with chemicals including

glass cleaner, any type of air freshener, insecticide, lubricants, wax

(car, industrial), abrasive, thinner, benzene, alcohol etc., which can

damage the product and/or its panel. Otherwise, this may result

in re, electric shock or product damage (Deformation, corrosion

or breakage).

Preparing

• If the TV is turned on for the rst time after it was shipped from the

factory, initialization of the TV may take a few minutes.

• Image shown may dier from your TV.

• Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

• The available menus and options may dier from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The items supplied with your product may vary depending on the

model.

• Product specications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not t into your TV’s USB port.

A

B

A

B

*A

10 mm

*B

18 mm

• Use a certied cable with the HDMI logo attached.

• If you do not use a certied HDMI

cable, the screen may not display

or a connection error may occur. (Recommended HDMI

Cable Types)

- High-Speed HDMI

®

/

TM

Cable (3m or less)

- High-Speed HDMI

®

/

TM

Cable with Ethernet (3m or less)

• How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference in

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

LG 55UK6100PVA User Manual Page 16

Comments to this Manuals

LG 55UK6100PVA User Manual Page 16

Comments to this Manuals

Related products and manuals for LCD TVs LG 55UK6100PVA