LG 43LF631V User Manual Page 1

LED TVLF63**AAFREEZERATIOL/R SELECTENTERBACKEXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1234567809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT AAAa X 6(M4 X L10)

2ENGLISHMake sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.)

ENGLISH3Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in re due to over-heating.Do not

4ENGLISHDo not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Contact the service centr

ENGLISH5If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, whic

6ENGLISHPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the ap

ENGLISH7The panel is a high technology display product with resolution of two million to eight million pixels. You may see tiny black dots and/or brig

8ENGLISH CAUTIONViewing environment•  Viewing Distance-- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. I

ENGLISH9Separate purchaseSeparate purchase items can be changed or modied for quality improvement without any notication. Contact your dealer to buy

10ENGLISHUsing the joystick button You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.Joystick Bu

ENGLISH11Securing the TV to a wall (This feature is not available for all models.)1 Insert and tighten the eye-bolts, or TV brackets and bolts on the

i?

12ENGLISH•  The length of screws may dier depending on the wall mount. Make sure to use the proper length.•  For more information, refer to the manua

ENGLISH13Remote control(Depending on model)The descriptions in this manual are based on the buttons on the remote control. Please read this manual car

14ENGLISH(Depending on model)FAVPPAGESUBTITLERATIOGUIDEQ.VIEWINPUT Q.MENULIVEMENURECENTMY APPSABA (POWER) Turns the TV on or o. Selects Radio, TV

ENGLISH15Magic remote functions(Depending on model)When the message “Magic remote battery is low. Change the battery.” is displayed, replace the batte

16ENGLISHD Used for viewing 3D video. (Depending on model) (Voice recognition)(Depending on model) Network connection is required to use the voice re

ENGLISH17LicensesSupported licenses may dier by model. For more information about licenses, visit www.lg.com.(Only LF59**) (Only LF63**, LF65**)Open

18ENGLISHSpecicationsWireless module•  Because band channel used by the country could be dierent, the user can not change or adjust the operating fr

ENGLISH19CI Module Size1 (W x H x D) 100.0 mm x 55.0 mm x 5.0 mmEnvironment conditionOperating Temperature 0 °C to 40 °COperating Humidity Less than 8

20ENGLISH(Only Jordan)WEEEDisposal of your applianceThe symbol indicating separate collection for electrical and electronic equipment consists of the

ededd+ea/b/cd+ed+ea/bb/c11 2-A32LF63**2-B40/43/49/55/60/65LF63**34-A32/40LF63**4-B43/49/55/60/65LF63**5-A32/40LF63**5-B43/49/55/60/65LF63**6

Record the model number and serial number of the TV.Refer to the label on the back cover and quote this information to your dealer when requiring any

OWNER’S MANUALEXTERNAL CONTROL DEVICE SETUPwww.lg.comPlease read this manual carefully before operating the set and retain it for future reference.

2ENGENGLISH2KEY CODESKEY CODES• This feature is not available for all models.Code (Hexa)Function NoteCode (Hexa)Function Note00 CH +, PR + R/C Button

3ENGENGLISH3EXTERNAL CONTROL DEVICE SETUPEXTERNAL CONTROL DEVICE SETUP• Image shown may differ from your TV.Connect the USB to Serial converter/RS-23

4ENGENGLISH4EXTERNAL CONTROL DEVICE SETUPPhone jack Type• You need to purchase the phone-jack to RS-232 cable required for the connection between the

5ENGENGLISH5EXTERNAL CONTROL DEVICE SETUPCommunication Parameters• Baud rate : 9600 bps (UART)• Data length : 8 bits• Parity : None• Stop bit : 1

6ENGENGLISH6EXTERNAL CONTROL DEVICE SETUPTransmission / Receiving ProtocolTransmission[Command1][Command2][ ][Set ID][ ][Data][Cr][Command 1] : Firs

7ENGENGLISH7EXTERNAL CONTROL DEVICE SETUP* Commands may work differently depending on model and signal.01. Power (Command: k a) ► To control Power *On

8ENGENGLISH8EXTERNAL CONTROL DEVICE SETUPData Min : 00 to Max : 64Ack [i][ ][Set ID][ ][OK/NG][Data][x]09. Tint (Command: k j) ► To adjust the screen

9ENGENGLISH9EXTERNAL CONTROL DEVICE SETUP1 0 05th Band1 0 1 0 020(decimal)Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]* It depends on model, and

2ABLF63*VA32/40LF63**LF63*VA43/49/55/60/65LF63**

10ENGENGLISH10EXTERNAL CONTROL DEVICE SETUPNumber - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use

11ENGENGLISH11EXTERNAL CONTROL DEVICE SETUP24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture.Transmission

12ENGENGLISH12EXTERNAL CONTROL DEVICE SETUP27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image sha

OWNER’S MANUALEXTERNAL CONTROL DEVICE SETUPwww.lg.comPlease read this manual carefully before operating the set and retain it for future reference.

2ENGENGLISH2KEY CODESKEY CODES• This feature is not available for all models.Code (Hexa)Function NoteCode (Hexa)Function Note00 CH +, PR + R/C Button

3ENGENGLISH3EXTERNAL CONTROL DEVICE SETUPEXTERNAL CONTROL DEVICE SETUP• Image shown may differ from your TV.Connect the USB to Serial converter/RS-23

4ENGENGLISH4EXTERNAL CONTROL DEVICE SETUPPhone jack Type• You need to purchase the phone-jack to RS-232 cable required for the connection between the

5ENGENGLISH5EXTERNAL CONTROL DEVICE SETUPCommunication Parameters• Baud rate : 9600 bps (UART)• Data length : 8 bits• Parity : None• Stop bit : 1

6ENGENGLISH6EXTERNAL CONTROL DEVICE SETUPTransmission / Receiving ProtocolTransmission[Command1][Command2][ ][Set ID][ ][Data][Cr][Command 1] : Firs

7ENGENGLISH7EXTERNAL CONTROL DEVICE SETUP* Commands may work differently depending on model and signal.01. Power (Command: k a) ► To control Power *On

ANTENNA /CABLE INVIDEOMONO( )AUDIOLRLRLF63*0, LF63*T, LF63*YB

8ENGENGLISH8EXTERNAL CONTROL DEVICE SETUPData Min : 00 to Max : 64Ack [i][ ][Set ID][ ][OK/NG][Data][x]09. Tint (Command: k j) ► To adjust the screen

9ENGENGLISH9EXTERNAL CONTROL DEVICE SETUP1 0 05th Band1 0 1 0 020(decimal)Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]* It depends on model, and

10ENGENGLISH10EXTERNAL CONTROL DEVICE SETUPNumber - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use

11ENGENGLISH11EXTERNAL CONTROL DEVICE SETUP24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture.Transmission

12ENGENGLISH12EXTERNAL CONTROL DEVICE SETUP27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image sha

AUDIO OUT / H/P OUTANTENNA /CABLE INLNB Satellite IN13/18V 700mA MaxVIDEOMONO( )AUDIOLRLRLF63*VB

3124345FREEZERATIOL/R SELECTENTERBACKEXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1234567809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT1243

ABEGDCF32LF6300-TA32LF630T-TA32LF630Y-TA32LF630V-TA32LF631V-TB32LF6310-TB32LF632T-TA40LF6300-TA40LF630T-TA40LF630Y-TA40LF630V-TA40LF631V-TB40LF6310-TB

OWNER’S MANUALSafety and ReferencePlease read this manual carefully before operating your set and retain it for future reference.LED TV** LG LED TV ap