LG 29FB5RL User Manual download pdf (Page 3)

3

Connection of external equipment

You can connect additional equipment, such as

VCRs, camcorders etc. to your set.

What is shown here may

be somewhat different

from your set.

Aerial socket

1. Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on a desired pro-

gramme number using the ‘Manual pro-

gramme tuning’ section.

4. Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the

VCR to audio/video in sockets of the set and

in sockets of the VCR to RF OUT sockets of

the set.

2. If the VCR is connected to the AV sockets on

the set, press the TV/AV button to select AV 1

or AV 2 ..

3. Press the PLAY button on the VCR.

The VCR playback picture appears on the

screen.

You can also record programmes received by

the TV on video tape via audio/video out sock-

ets.

Note : If you have a mono VCR, connect the

audio cable from the VCR to the AUDIO L/MONO

socket of the set.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to

the Euro scart socket of the set.

2. Press the PLAY button on the VCR.

If your VCR outputs a switching voltage when

connected to Euro scart socket, the set will

switch to AV 1 mode automatically. But if you

want to keep on watching TV mode, press the

DD

/

EE

or NUMBER buttons.

Otherwise press the TV/AV button on the

remote control

handset to select

AV 1 The VCR playback pic-

ture appears on the screen.

You can also record programmes received by the

TV on video tape.

Note : Signal type RGB, i.e. the signals red, green

and blue can only be selected for the Euro scart

socket. These signals are transmitted, for exam-

ple, by a pay TV decoder, game machine or photo

CD unit, etc.

Component in sockets (option)

1. Connect the COMPONENT video output

sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the

COMPONENT (480i) to the COMPONENT

INPUT sockets (Y PB PR) on the set.

2. Connect the audio cable from the COMPO-

NENT to AUDIO IN sockets of AV IN2.

3. Press the TV/AV button to select

COMPO-

NENT

.

4. Press the PLAY button on the COMPONENT.

The COMPONENT playback picture appears

on the screen.

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments