LG 21FU3RLX User Manual download pdf (Page 2)

Installation

Connection of external equipment

Aerial socket

1. Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on a desired pro-

gramme number using the ‘Manual pro-

gramme tuning’ section.

4. Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR

to audio/video in sockets of the set and in sock-

ets of the VCR to RF OUT sockets of the set.

2. If the VCR is connected to the AV sockets on the

set, press the TV/AV button to select AV 1 or AV 2 .

3. Press the PLAY button on the VCR.The VCR

playback picture appears on the screen.

You can also record programmes received by the

TV on video tape via audio/video out sockets.

Note : If you have a mono VCR, connect the

audio cable from the VCR to the AUDIO L/MONO

socket of the set.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to

the Euro scart socket of the set.

2. Press the PLAY button on the VCR.

If your VCR outputs a switching voltage when

connected to Euro scart socket, the set will

switch to AV 1 mode automatically. But if you

want to keep on watching TV mode, press the

or NUMBER buttons.Otherwise press

the TV/AV button on the remote control

handset to select

AV 1 The VCR playback pic-

ture appears on the screen.

You can also record programmes received by the

TV on video tape.

Note : Signal type RGB, i.e. the signals red, green

and blue can only be selected for the Euro scart

socket. These signals are transmitted, for exam-

ple, by a pay TV decoder, game machine or photo

CD unit, etc.

Component in sockets (option)

1. Connect the COMPONENT video output

sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the

COMPONENT (480i) to the COMPONENT

INPUT sockets (Y P

B PR) on the set.

2. Connect the audio cable from the COMPO-

NENT to AUDIO IN sockets of AV IN2.

3. Press the TV/AV button to select COMPONENT.

4. Press the PLAY button on the COMPONENT.

The COMPONENT playback picture appears

on the screen.

Headphone socket (option)

You can listen to the sound through the head-

phones. To adjust the headphone volume, press

the F / G button.

If you press the MUTE button, the sound from the

headphone’s is switched off.

Location and function of controls

Battery installation

The remote control handset is powered by AAA

type batteries.Install batteries as indicated by the

polarity symbols ( and ) marked inside the

compartment.

Note : To avoid damage from possible battery

leakage, remove the batteries if you do not plan to

use the remote control handset for an extended

period of time

Power

This set operates on an AC mains supply, the volt-

age is as indicated on the label on the back cover.

Never apply DC power to the set. In the event of

thunderstorms or powercuts, please pull out the

aerial and mains plugs.

Press the POWER button on the front panel or

side panel to turn off the TV when the TV set is not

being used for a long time.It is recommended to

remove the plug from the wall outlet(Power point).

Disconnecting device from mains

Mains plug is the disconnecting device. The plug

must remain readily operable

Warning

To prevent fire or shock hazard, do not expose the set

to rain or moisture.

Do not place anything containing liquid on top of the set,

this may cause a fire or could give an electric shock.

Service

Never remove the back cover of the set as this can

expose you to very high voltage and other hazards. If

the set does not operate properly, unplug it and call

your dealer.

Aerial

Connect the aerial cable to the socket on the back

cover. For the best reception an outdoor aerial

should be used.

Location

Position your set so that no bright light or sunlight

falls directly onto the screen. Care should be

taken not to expose the set to any unnecessary

vibration, moisture, dust or heat. Also ensure that

the set is placed in a position to allow a free flow

of air. Do not cover the ventilation openings on the

back cover.

Note (option):

To remove dirt or fingerprint on the surface of your

TV, please rub with a line-free cloth supplied in

the accessory.Do not pose too much pressure in

cleaning so as to prevent any risk of damage to

the product.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

LG 21FU3RLX User Manual Page 2

Comments to this Manuals

Related products and manuals for LCD TVs LG 21FU3RLX