LG LSXS26396S Owner's Manual download pdf (Page 20)

20 INSTALLATION

Connect the tubing to the refrigerator.

NOTE

• Before making the connection to the refrigerator, be

sure that the refrigerator power cord is not plugged

into the wall outlet.

• Remove the plastic exible cap from the water

valve.

• Place the compression nut and ferrule (sleeve) onto

the end of the tubing as shown.

• Insert the end of the copper tubing into the

connection as far as possible. While holding the

tubing, tighten the tting.

Tubing

Clamp

¼ in. Compression Nut

Ferrule

(sleeve)

¼ in. Tubing

Refrigerator

Connection

Turn the water on at the shutoff valve.

Tighten any connections that leak.

CAUTION

• Check to see if leaks occur at the water line

connections.

Leveling and Door Alignment

Leveling

The refrigerator has two front leveling legs. Adjust the

legs to alter the tilt from front-to-back or side-to side.

If the refrigerator seems unsteady, or the doors do

not close easily, adjust the refrigerator’s tilt using the

instructions below:

Turn the leveling leg to the left to raise that side

of the refrigerator or to the right to lower it. It may

take several turns of the leveling leg to adjust the

tilt of the refrigerator.

NOTE

• A are nut wrench works best, but an open-end

wrench will sufce. Do not over-tighten.

Open both doors and check to make sure that

they close easily. If the doors do not close easily,

tilt the refrigerator slightly more to the rear by

turning both leveling legs to the left. It may take

several more turns, and be sure to turn both

leveling legs the same amount.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 57 58

Comments to this Manuals

No comments

LG LSXS26396S Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Fridges LG LSXS26396S