LG TS-100 User Manual download pdf (Page 8)

Adjust the settings - more you can do

When you turn on for the first time (optional)

The menu for a language selection will appear when you turn on the unit for the

first time. You must select a language to use the unit. Use vV b B to select a

language then press ENTER and the confirm menu will appear. Use bB to

select [Enter] then press ENTER.

Adjust the language settings

Menu Language – Select a language for the Setup menu and on-screen

display.

Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/

Menu.

[Original]: Refers to the original language in which the disc was recorded.

[Other]: To select another language, press number buttons then ENTER to

enter the corresponding 4-digit number according to the language code list.

(see page 14) If you make a mistake while entering number, press CLEAR to

delete numbers then correct it.

[Off] (for Disc Subtitle): Turn off Subtitle.

Adjust the display settings

TV Aspect – Select which screen aspect to use based on the shape of your TV

screen.

[4:3]: Select when a standard 4:3 TV is connected.

[16:9]: Select when a 16:9 wide TV is connected.

Display Mode – If you selected 4:3, you’ll need to define how you would like

widescreen programs and films to be displayed on your TV screen.

[Letterbox]: This displays a widescreen picture with black bands at the top

and bottom of the screen.

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.

TV Output Select – Select an option according to the TV connection type.

[RGB]: When your TV is connected with the SCART jack.

[YPbPr]: When your TV is connected with the COMPONENT/

PROGRESSIVE SCAN OUTPUT jacks on the unit.

Adjust the audio settings

Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when

using the DIGITAL AUDIO OUTPUT jack.

[Bitstream]: Select this when you connect this unit’s DIGITAL AUDIO

OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG

decoder.

[PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s

DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital

or MPEG decoder.

[Off] (for DTS): Select this when you connect this unit’s DIGITAL AUDIO

OUTPUT jack to an amplifier without a built-in DTS decoder.

Sample Freq. (Frequency) – Selects the sampling frequency of the audio

signal.

[48 KHz]: The audio signals are always converted to 48 kHz.

[96 KHz]: The audio signals are output in their original format.

DRC (Dynamic Range Control) – Make the sound clear when the volume is

turned down (Dolby Digital only). Set to [On] for this effect.

Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The

karaoke channels on the disc mix into normal stereo sound.

Adjust the settings

1Display setup menu: SETUP

2 Select a desired option on the first level:

vv VV

3 Move to second level:

4Select a desired option on the second level:

vv VV

5 Move to third level:

6 Change the setting:

vv VV

/ ENTER

ON REMOTE

DV4M2H-E.BUKRLLK_4323_ENG 9/23/09 4:17 PM Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

LG TS-100 User Manual Page 8

Comments to this Manuals

Related products and manuals for DVD players LG TS-100