LG DR385 User Manual download pdf (Page 10)

Hooking up the unit - more you can do

Connecting a Cable Box

If a cable box is required for reception the cable channels, connect a coaxial

cable from the wall jack to the IN connector on the cable box and a coaxial

cable from the OUT connector on the cable box to the ANT. IN on the recorder.

To view or record a cable channel through RF output from the cable box, tune

the recorder must be tuned to the cable box output channel (usually channel 3

or 4). Select a channel using the cable box. With this connection, you cannot

record one channel while viewing another.

RF coaxial connection

Connect one end of the RF cable to the ANTENNA OUT jack on the unit and

other end to the ANTENA IN jack on your TV. You can get Audio and Video

signals together with this connection.

To set the recorder’s RF output, press and hold PR/CH (V/v) on the remote

control for more than five seconds. The [ch03] or [ch04] appears in the display

window. Press PR/CH (V/v) to change the RF output channel (ch03 or ch04)

and then tune the TV to the selected channel.

Component connection

Connect one end of the component(Y PB PR) cable to the COMPONENT OUT-

PUT jack on the unit and other end to the COMPONENT INPUT jack on your

TV.

Connect one ends of the audio cables (red and white) to the analog AUDIO

OUTPUT jack on the unit and other ends to the AUDIO INPUT jack on your TV.

If your television is a high-definition or “digital ready” television, you may take

advantage of the unit’s progressive scan output for the highest video resolution

possible. If your TV does not accept the Progressive Scan format, the picture

will appear scrambled with the progressive signal.

Set the resolution to 480p using P/S button on the front panel for progressive

signal.

DR385-M-BCOLLLK-ENG 6/23/08 2:10 PM Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

No comments

LG DR385 User Manual Page 10