LG DR289H User Manual download pdf (Page 21)

Hookup and

Settings

Recording Settings

Disc Record Mode

You can set the picture quality for recording;

XP (High Quality), SP (Standard Quality),

LP (Low Quality), EP (Extend Quality),

MLP (Maximum Long Play).

DV Record Audio

You need to set this if you have a camcorder using

32kHz/12-bit sound connected to the front panel DV

IN jack.

Some digital camcorders have two stereo tracks for

audio. One is recorded at the time of shooting; the

other is for overdubbing after shooting.

On the Audio 1 setting, the sound that was recorded

while shooting is used.

On the Audio 2 setting, the overdubbed sound is

used.

AV2 Recording

You can select the type of the signal when recording

video input signal from the device connected to the

AV2 DECODER socket.

[Auto] The video input signal will automatically follow

the video signal received.

[CVBS] Only for recording CVBS input signal.

[RGB] Only for recording RGB input signal.

Auto Chapter

When DVD recording, chapter markers are put in

specified setting. You can change this interval to

5 minutes or 10 minutes. If you select [None], switch

off automatic chapter marking altogether with the

[None] setting.

Note:

If the [Disc Record Mode] setting is set to [MLP]

mode, The [5 Min.] option is not selectable.

Disc Settings

Initialize

If you load a completely blank disc, the recorder will

initialize the disc.

DVD-R: The recorder initialize the disc to Video mode.

The recording mode will always be Video mode.

DVD-RW/DVD+RW/DVD+R (DL)/DVD-RAM: The

Initialize menu will appears. Select [OK] then press

ENTER. DVD-RW disc is initialized to Video mode.

Also, you can reformat the DVD-RW/DVD+RW/

DVD-RAM from the Setup menu as below.

1. Select [Initialize] option then press B.

2. Press ENTER while [Start] is selected.

Initialize menu appears.

3. Use b / B to select a desired mode (VR Mode or

Video Mode) then press ENTER.

Confirm message will appear.

For DVD+RW and DVD-RAM discs, go to step 4.

4. Use b / B to select [OK] then press ENTER.

It takes a few moments to initialize the disc.

Caution

If you want to change the disc format, everything

recorded on the disc will be erased.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Comments to this Manuals

No comments

LG DR289H User Manual Page 21

Comments to this Manuals

Related products and manuals for DVD players LG DR289H