LG DP471BT User Manual download pdf (Page 7)

Hooking up the unit

Audio and Video Connection

Connect the AV OUT jack on the unit to the corresponding input jacks on your

TV using the supplied AV cable as shown below.

Note: The signal does not come out from AV OUT jack when the unit is set to

[TV] mode.

Revolving the LCD panel

You can revolve the LCD panel of the unit clockwise a maximum of 180

degrees for use. You can also operate the unit after revolving the LCD panel

180 degrees and folding it back down.

To revolve the LCD panel, place the unit on a stable and even surface such

as on a table. Push the LCD panel up and then lift it into a vertical position.

Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the

LCD panel after revolving it.

To revolve the LCD panel to its original position, open the LCD panel to a

vertical position. Revolve the LCD panel counter clockwise slowly 180 degrees.

• When finished using the unit, return the LCD panel to its original position.

• Do not leave the LCD panel in the face-up position, or sudden shocks may

damage it.

Selecting the operation mode

You need to select a operation mode before

using this unit. Press MODE on the unit and the

operation mode selection menu appears. Use

b / B to select a mode then press ENTER.

• Select [DISC] to playback the inserted disc.

• Select [TV] to view the TV connecting the antenna.

• Select [USB] to playback the file(s) in the connected USB Flash Drive.

Right side of the unit

Plug into the

“AV OUT” jack.

Manufactured under license from Dolby Laboratories. “Dolby” and the

double-D symbol are trademarks of Dolby Laboratories.

DP372D-P_APOLLLK_ENG_MFLMFL473497 7DP372D-P_APOLLLK_ENG_MFLMFL473497 7 3/31/09 7:15:50 PM3/31/09 7:15:50 PM

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

No comments

LG DP471BT User Manual Page 7