LG GN-B352YTC User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
OPERATION
11
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, allow 5 minutes delay before restarting.
TEMPERATURE CONTROL
REFRIGERATOR
FREEZER
• Your refrigerator has two controls that let you regulate the
temperature in the freezer and refrigerator compartments.
• The default setting of the temperature control button for the
refrigerator compartment is NORMAL.
You can set the refrigerator temperature using the Electro Temp
Control.
Whenever pressing the button, the LED emit light.
The temperature of the compartment goes down as the LED
luminesce from MIN to MAX.
You can select the desired set point in five (5) steps between
minimum and maximum.
For the economic electricity, set the LED to the MIN position.
COLD AIR CONTROL - 1, 2, 3, 4, 5, 6, 7, 8
Setting at "8", the freezer compartment becomes colder.
But the refrigerator compartment becomes warmer because less
cold air flows into the refrigerator compartment.
In cold weather the unit operates less and the freezer
compartment has a tendency to warm up.
For colder freezer, turn the COLD AIR CONTROL to "7"~"8".
Setting the Freezer Knob at will satisfy 4 STAR.
Setting the Freezer Knob at NORMAL will have sufficient freezing effect, so it is recommended to set the
Knob at NORMAL.
If you take a lot of foods in the freezer or open its door
frequently, its temperature is apt to be somewhat higher.
In this case, set the COLD AIR CONTROL dial between 7
and 8 to cool it. Return the COLD AIR CONTROL dial to
the original position to cut down the consumption of energy.
In hot weather or to put much foods in the refrigerator
compartment, the refrigerator compartment has a
tendency to warm up. For colder refrigerator, turn the COLD
AIR CONTROL to "2"~"4" to direct more cold air into the
refrigerator compartment, and the Electro Temp Control to MAX.
Setting at "7"~"8" of the COLD AIR CONTROL, the refrigerator
compartment will not be cold enough.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments