LG Projector AF115 User Manual download pdf (Page 33)

Information

Turn off the projector and unplug the power cable.

Carefully place on a cushioned surface.

(Allow the lamp to cool for 1 hour before

removing the used lamp from the projector.)

Unscrew the screw from the lamp cover using a

screwdriver.

Lamp case screw

After lifting the lamp cover off, remove the two

retaining screws on the lamp case with a screw-

driver.

Lift the lamp up from the projector.

Pull out the handle slowly and remove the lamp

case.

Insert the new lamp gently into the correct position.

Push the lamp bottom to check if it is correctly

installed.

Tighten the screws you removed in step 3.

(Make sure they are fixed firmly.)

Close the lamp cover and install the screws from

step 2 to install the cover.

(If the lamp cover is not installed correctly the unit will not

power on.)

Replacing the Lamp

Screws

Using another manufacturers lamp may cause damage to the projector or lamp.

Make sure the lamp cover is securely fastened. If the lamp cover is not installed correctly the unit will not power on.

If this fault persists contact an LG Authorized Service Center.

Knob

bottom

1 2 ... 28 29 30 31 32 33 34 35 36

No comments

LG Projector AF115 User Manual Page 33