LG LAC6750 User Manual download pdf (Page 7)

Before installing, make sure that the ignition-switch is set to

OFF and remove the terminal of the car battery to avoid

short-circuiting.

1 Remove the existing receiver unit.

2 Make the necessary connections.

3 Install the installation sleeve.

4 Install the unit into the installation sleeve.

Bend the claws

according to

the thickness

of the

dashboard

Control panel

If there is already an installation sleeve for the receiver unit

in the dashboard, it must be removed.

1 Remove the rear support from the unit.

2 Remove the control panel and trim ring from the unit.

3 Insert the lever A into the hole on one side of the unit.

Perform the same operation on the other side and pull

the unit out from the mounting sleeve.

Control panel

1 Slide the unit into the ISO-DIN frame.

2 Fit screws removed from the old unit.

3 Slide the unit and frame into the dash opening.

4 Install the dash panel or adapter plate.

5 Install the trim ring to the unit.

6 Install the control panel to the unit.

Basic Installation

Removing the existing receiver unit

ISO-DIN Installation

Installation

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

LG LAC6750 User Manual Page 7