LG LAC5900RN User Manual download pdf (Page 8)

CAR CD/MP3/WMA Receiver

Installation

If there is already an installation

sleeve for the receiver unit in the

dashboard, it must be removed.

1 Remove the rear support from the

unit.

2 Remove the control panel and trim

ring from the unit.

3 Insert the lever A into the hole on

one side of the unit.

Perform the same operation on

the other side and pull the unit out

from the mounting sleeve.

Control panel

1 Slide the unit into the ISO-DIN

frame.

2 Fit screws removed from the old

unit.

3 Slide the unit and frame into the

dash opening.

4 Install the dash panel or adapter

plate.

5 Install the trim ring to the unit.

6 Install the control panel to the unit.

Removing the existing receiver unit

ISO-DIN Installation

Before installing, make sure that the

ignition-switch is set to OFF and

remove the terminal of the car battery

to avoid short-circuiting.

1 Remove the existing receiver unit.

2 Make the necessary connections.

3 Install the installation sleeve.

4 Install the unit into the installation

sleeve.

Bend the claws

according to

the thickness

of the

dashboard

Control panel

Basic Installation

1 Pull out the battery holder with a

sharp product like a ball point pen.

2 Put the battery with and cor-

rectly on the battery holder.

3 Push the battery holder back into its

original position.

Battery Installation

Note

• Use only one CR2025 (3V) lithium battery.

• Remove the battery if the remote control is not used for a long period of

time.

• Do not leave the product in a hot or humid place.

• Do not handle the battery with metallic tools.

• Do not store the battery with metallic materials.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

LG LAC5900RN User Manual Page 8

Comments to this Manuals

Related products and manuals for Car media receivers LG LAC5900RN