LG HB806TM User Manual download pdf (Page 14)

System Setting14

System Setting

Wired Network Setup

If there is a DHCP server on the local area network

(LAN) via wired connection, this player will

automatically be allocated an IP address. After

making the physical connection, a small number of

home networks may require the player’s network

setting to be adjusted. Adjust the [NETWORK]

setting as follow.

Preparation

Before setting the wired network, you need to

connect the broadband internet to your home

network.

1. Select [Connection Setting] option in the

[Setup] menu then press ENTER (

2. Select [Yes] and press ENTER (

) to continue.

The new connection settings reset the current

network settings.

3. Use

W/S/A/D

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

W/S/

A/D

and numerical buttons. If you make a

mistake while entering a number, press CLEAR

to clear the highlighted part.

Note

4. Select [OK] and press ENTER (

) to apply

network settings.

5. The player will ask you to test the network

connection. Select [OK] and press ENTER (

) to

complete the network connection.

6. If you select [Test] and press ENTER (

) at

step 5 above, the network connection status is

displayed on the screen.

You can also test it on the [Connection Status]

in the [Setup] menu.

HB806TM-F2_BINDLL_SIM_ENG_0727.indd 14 2011-04-26 �� 9:10:41

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments

LG HB806TM User Manual Page 14

Comments to this Manuals

Related products and manuals for Blu-Ray players LG HB806TM