LG FX166 User Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 67
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
Operating46
Operating
4
Radio Operations
Be sure that the antenna is connected.
(Refer to the page 21)
Listening to the radio
1. Press RADIO&INPUT (
P
) until TUNER (FM)
appears in the display window. The last received
station is tuned in.
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change. Scanning stops when the unit tunes in
a station.
Or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by rotating -/+ (VOLUME) on
the front panel or by pressing VOL (+/- ) on the
remote control.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press RADIO&INPUT (
P
) until the TUNER (FM)
appears in the display window.
2. Select the desired frequency by using
TUNING (-/+).
3. Press ENTER (
b
) a preset number will ash in
the display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press ENTER (
b
). The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. Press PRESET (-/+) repeatedly on the remote
control to select the preset station you want.
Deleting all the saved stations
Press and hold CLEAR for two seconds.
“ERASE ALL will ash up. Then all the saved stations
are deleted.
Deleting a saved station
1. Press PRESET - / + to Select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selected preset
number.
Improving poor FM reception
Press B (blue) (MONO/STEREO) coloured button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.
See information about a radio
station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS repeatedly
to cycle through the various data types:
PS (Programme Service Name)
The name of the channel will appear in
the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time and date as
broadcast by the station.
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 66 67

Comments to this Manuals

No comments