LG BP430 Owner's Manual download pdf (Page 17)

Connecting 17

Connecting

1. Select [Connection Setting] option in the

[Settings] menu then press ENTER (

2. Read the preparations for the network settings

and then press ENTER (

) while [Start] is

highlighted.

Network will automatically be connected to the

unit.

Advanced Setting

If you want to set the network settings manually,

use

W/S

to select [Advanced Setting] on the

[Network Setting] menu and press ENTER (

1. Use

W/S/A/D

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

W/S/A/D

and numerical buttons. If you

make a mistake while entering a number, press

CLEAR to clear the highlighted part.

Note

2. Select [Next] and press ENTER (

) to apply

network settings.

Network connection status is displayed on the

screen.

3. Press ENTER (

) while [OK] is highlighted to

finish the wired network settings.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 64 65

No comments

LG BP430 Owner's Manual Page 17