LG BH7530T User Manual download pdf (Page 20)

Connecting20

Connecting

Wired network setup

If there is a DHCP server on the local area network

(LAN) via wired connection, this player will

automatically be allocated an IP address. After

making the physical connection, a small number of

home networks may require the player’s network

setting to be adjusted. Adjust the [NETWORK]

setting as follow.

Preparation

Before setting the wired network, you need to

connect the broadband internet to your home

network.

1. Select [Connection Setting] option in the

[Settings] menu then press ENTER (

2. Read the preparations for the network settings

and then press ENTER (

) while [Start] is

highlighted.

Network will automatically be connected to the

unit.

Advanced Setting

If you want to set the network settings manually,

use

W/S

to select [Advanced Setting] on the

[Network Setting] menu and press ENTER (

1. Use

W/S

to select [Wired] and press ENTER

(

2. Use

W/S/A/D

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

W/S/

A/D

and numerical buttons. If you make a

mistake while entering a number, press CLEAR

to clear the highlighted part.

Note

3. Select [Next] and press ENTER (

) to apply

network settings.

Network connection status is displayed on the

screen.

4. Press ENTER (

) while [OK] is highlighted to

finish the wired network settings.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 81 82

Comments to this Manuals

No comments

LG BH7530T User Manual Page 20

Comments to this Manuals

Related products and manuals for Blu-Ray players LG BH7530T