Lg LHB326 User Manual download pdf (Page 26)

Connecting26

Connecting

2

Wireless Network Setup

For the wireless network connection, the player

needs to be set up for network communication.

This adjustment can be done from the [Setup]

menu. Adjust the [NETWORK] setting as follow.

Setting up the access point or the wireless router

is required before connecting the player to the

network.

Preparation

Before setting the wireless network, you need to:

-

connect the broadband internet to the wireless

home network.

-

set the access point or wireless router.

-

note the SSID and security code of the network.

-

insert the included Wireless LAN Adapter to the

USB port on the front panel.

1. Select [Connection Setting] option in the

[Setup] menu then press ENTER (

b

).

2. The [Connection Setting] menu appear on the

screen. Use

W/S

to select [Wireless] and press

ENTER (

b

).

3. Select [Yes] and press ENTER (

b

) to continue.

The new connection settings reset the current

network settings.

4. The player scans the all available access points

or wireless routers within range and display

them as a list. Use

W/S

to select an access

point or wireless router on the list, and then

press ENTER (

b

).

If you have security on your access point or

wireless router, verify that the WEP or WPA key

that was entered into the player matches the

router’s information exactly. You need to input

the security code as necessary.

y

WEP security mode generally have 4 keys

available on an access point or wireless

router’s setting. If your access point or

wireless router use WEP security, enter the

security code of the key “No.1” to connect

on your home network.

y

An Access Point is a device that allows you

to connect to your home network wirelessly.

,

Note

[Manual] – Your access point may not be

broadcasting its access point name (SSID).

Check your router settings through your

computer and either set your router to

broadcast SSID, or manually enter the access

point name (SSID) in [Manual].

[Push Button] – If your access point or

wireless router that supports the Push Button

Conguration method, select this option and

press the Push Button on your access point or

wireless router within 120 counts. You do not

need to know the access point name (SSID) and

security code of your access point or wireless

router.

5. Use

W/S/A/D

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

W/S/

A/D

and numerical buttons. If you make a

mistake while entering a number, press CLEAR

to clear the highlighted part.

,

Note

6. Select [OK] and press ENTER (

b

) to apply

network settings.

7. The player will ask you to test the network

connection. Select [OK] and press ENTER (

b

) to

complete the network connection.

8. If you select [Test] and press ENTER (

b

) at

step 7 above, the network connection status is

displayed on the screen. You can also test it on

the [Connection Status] in the [Setup] menu.

HB926_ENG.indd 26 11. 03. 04 �� 5:14

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Comments to this Manuals

No comments