LG LT1030HR User Manual download pdf (Page 11)

Owner’s Manual 11

ENGLISH

Installation

Remove packing sheet from the back of the sleeve, and

packing corner and blue tape from the air conditioner.

INSTALLATION REQUIREMENTS

If you use an existing wall sleeve, you should

measure its dimensions.

Install the new air conditioner according to these

installation instructions to achieve the best

performance. All wall sleeves used to mount the

new air conditioner must be in good structural

condition and have a rear grille to securely attach

the new air conditioner. (FIG. 1)

With the LGE sleeve(optionally supplied with your

unit), you can maintain the best performance of the

new air conditioner. (FIG. 2)

ELECTRICAL SERVICE

Check your available electrical service. The power

supply available must be the same as that shown

on the unit nameplate (found on left side of

cabinet).

All models are equipped with a 3-prong service

plug to provide proper service and safe positive

grounding. Do not change plug in any way. Do not

use an adapter plug. If your present wall outlet does

not match your plug, call a qualified electrician to

make the necessary corrections. SAVE CARTON

for storage and this OWNER'S MANUAL for future

reference. The carton is the best way to store unit

during winter or when not in use.

INSTALLATION HARDWARE

14-

(366 mm)

24-

(626 mm)

18"(458 mm)

19-

(499 mm)

aver

2 Size options

To avoid risk of personal injury, property damage, or product

damage due to the weight of this device and sharp edges

that may be exposed:

• Air conditioners covered in this manual pose an excessive

weight hazard. Two or more people are needed to move

and install the unit.

To prevent injury or strain, use proper lifting and carrying

techniques when moving unit.

• Carefully inspect location where air conditioner will be

installed. Be sure it will support the weight of the unit over

an extended period of time.

• Handle air conditioner with care. Wear protective gloves

whenever lifting or carrying the unit. AVOID the sharp

metal fins of front and rear coils.

• Make sure air conditioner does not fall during installation.

REQUIRED TOOLS:

• Tight Fitting gloves

• Standard screwdriver

• Phillips screwdriver

• Pliers

• Sharp knife

• 3/8-inch open end

wrench or adjustable

wrench

• 1/4-inch hex socket

and ratchet

• Tape measure

• Electric drill

• 1/4-inch drill bit

FIG. 1

Air Conditioner

ITEM NAME OF PARTS Q'TY

1 PLASTIC GRILLE 1

2 HORIZONTAL INSULATION STRIPS 2

3 AROUND INSULATION STRIPS 2

4 SUPPORT BLOCK 2

5 BAFFLE 1

6 TRIM FRAME 2

7 SHIM 2

PLASTIC NUTS AND WASHER SCREWS

9 GRILLE REAR 1

15-

(394 mm)

16-

(425 mm)

25-

(656 mm)

Expanded

aluminum metal grille

FIG. 2

LGE Wall Sleeve

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comments to this Manuals

No comments

LG LT1030HR User Manual Page 11

Comments to this Manuals

Related products and manuals for Air filters LG LT1030HR