LG PC700-DHCJP User Manual

P/NO. : MFL69325402(1506-REV00)Printed in KoreaPlease read these safety precautions carefully before using the product. Make sure to connect the pow

103 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.4 Connect the PC100 to the monitor with a LINE-OUT cable.MIC INP/WDPMIC INP/WDPMIC I

11PC2003 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.4 Connect the PC100 to the monitor with a LINE-OUT cable.5 Connect a LAN cable

12PC200 Monitor IntegrationIf card does not become fully inserted into the insertion direction.Hit by hand carefully to make fully connected.Note1 Rem

13PC7001 Remove the screw & metal cover.2 Attach the product to the rail slots, and press it upward.3 Use screws to secure the product and the pro

14We recommend you to use the items provided with your PC700 and follow our instructions for inte-grating the product with your monitor in order to en

15PC7002Secure the PC700 to the set using the four screws provided.PC700 Monitor IntegrationFor proper use, it is recommended to use the basic compone

16For proper use, it is recommended to use the basic components provided with the PC700 to attach it to a monitor.The picture shows an example connect

17PC7003Secure the PC700 to the set using the four screws provided.● RGB, DP(Display Port), LINE-OUT(Audio Out), and LAN cables are not included. Yo

184 Connect PC700 (OUT) to the monitor (IN) with an RS-232C cable.3 Connect the PC700 to the monitor with a LINE-OUT(Audio Out) cable.AUDIOINAUDIOINAU

19PC7004 Connect PC700 (OUT) to the monitor (IN) with an RS-232C cable.3 Connect the PC700 to the monitor with a LINE-OUT(Audio Out) cable.5 Connect a

2Please check that these components are present prior to installing.PC100 ComponentsWeight● The specifications shown above may change without prior n

20Connecting a Monitor with DP(Display Port) Cable2Connect PC700 to the monitor via a DP cable.1Connect the appropriate power cables to a monitor and

21PC7004Connect a LAN cable to PC700.● If you connect multiple cables simultaneously and turn the product on, video output is prioritized accordingly

3PC100PC100 Monitor Integration1 Place the handle into the slots on the side of the product.2 Use screws to secure the handle.3 Place the rail in the

44As shown below, use screws to secure the Box Guide in the four tap holes at the back of the monitor.5 Attach the Box Guide to the rail slots, and pr

5PC1004As shown below, use screws to secure the Box Guide in the four tap holes at the back of the monitor.5 Attach the Box Guide to the rail slots, a

63 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.MIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/

7PC1003 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.5 Connect a LAN cable to the PC100.4 Connect the PC100 to the monitor with a LIN

84 Connect a LAN cable to PC100.3 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.MIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WDPMIC INP/WD

9PC1004 Connect a LAN cable to PC100.3 Connect PC100 (OUT) to the monitor (IN) with an RS-232C cable.Connecting a Monitor with DP Cable● To enable