LG ACC-CR-EH5C User Manual

ACC-CR-EH5COwner's ManualRotating Ceiling Mount Kitwww.lg.comAfter reading the manual, please keep it handy for future reference.P/No: MFL6968170

5 Fold the connectors on the opposite side of the 16/22 pin cables to make them parallel to the cable. 22161622221616226 Insert the connectors of th

8 Connect the HDMI cable with the label marked ‘FRONT’ to the front side. Insert the 16/22 pin cable with the red mark into the cable holder and atta

10 Cover the FRONT side with the side of the T-con box cover that has the IR receiver and attach it using four screws (Ø3 x L6) on the opposite side.

12 Fasten six screws (M4 x L10) to the bottom part of the T-con cover. 13 Prior to fastening the cover, connect the adapter and IR cable to the rotati

14 Install the device on the ceiling using four anchor bolts.1514ENGENGLISHENGENGLISH

FIXING THE ANCHOR SCREWS• Check the ceiling material and the thickness of the finish material. The anchor screws can only be used if the ceiling is

15 Fix the cover in place using four screws (M4 x L6). Detach the temporarily connected IR cable receptor from the cover, then use leftover magnetic t

17 Attach the 16/22 pin cables using two screws (M3 x L4.5). 2216221618 Position the jack cover so the cables fit into the cut spaces and attach it u

19 Attach the mounting brackets to the Signage box using four screws (M4 x L8). CAUTION• Fasten the mounting bracket holes while ensuring that the S

Connect the power cable to the Signage box. 1 2 1918ENGENGLISHENGENGLISH

SAFETY PRECAUTIONS• If you are a professional installer, please read this manual carefully before installing the product.• If you are a professional

REMOTE CONTROLThe descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the monitor co

CAUTION• Be sure to point the remote control toward the remote control sensor on the monitor.• Some features of the remote control may not be suppo

PRODUCT SPECIFICATIONSThe product specifications below may change without prior notice to improve the features of the product.The symbol refers to al

A B C DHeightType Pipe No. Dimensions (width x depth x height) (mm) Weight (kg)A1 1227.6 x 390.0 x 1535.1 26.1B2 1227.6 x 390.0 x 2020.1 28.3C3 1227.

• Disconnect the plug from the outlet before installation. - Otherwise, it may cause an electric shock or fire.• Wear working gloves when installing

• When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force. - A damaged cable may result in electr

BEFORE INSTALLATION• Do not use this product for purposes other than to attach the set to the ceiling.• Do not install or use the rotating ceiling m

(M3 x L5.5)76ENGENGLISHENGENGLISH

CAUTION• When installing or adjusting the height of this product, two or more people are required. If you try to install or move the product alone,

3 After connecting the pipe to the set, assemble the IR cable-linked cover and ceiling mount in order. The number of pipes connected is optional. 1

4 Fasten a screw (M3 x L5.5) in each screw hole between the pipes to fix them together. NOTE• Line up the indicated dot on one pipe (A) with the pi