Make sure to read the Important Precautions before using theproduct. Keep the User's Guide(CD) in an accessible place for futurereference.See the
9Connecting the Display W1946T/W1946TN/W2046T/W2246T/W2346TNOTE‘ Self Image Setting Function’? This function provides the user with optimal displayset
10Connecting the Display W1946S/W1946SN/W2046S/W2246S/W2346SNOTE‘ Self Image Setting Function’? This function provides the user with optimal displayse
Connecting the Display1 231 23 Using the cable holder (This feature is not available in all models.)Cable holderCable holderW1946T/W1946TN/W2046TW1946
12Control Panel FunctionsFront Panel ControlsMENU ButtonOSD LOCKED/UNLOCKEDThis function allows you to lock the current controlsettings, so that they
13Control Panel FunctionsAUTO ButtonAUTO IMAGE ADJUSTMENTWhen adjusting your display settings, always press theAUTO button before entering the On Scre
14On Screen Display (OSD) Control AdjustmentScreen AdjustmentMaking adjustments to the image size, position and operatingparameters of the display is
15On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment,and setting menus.NORMAL
16On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed
17On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionExit : Exit: Decrease: Increase: Select another sub-menu: Restart to s
18On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionCLOCKPHASETo minimize any vertical bars orstripes visible on the scree
1This unit has been engineered and manufactured to ensure your personal safety,however improper use may result in potential electrical shock or fire
19On Screen Display(OSD) Selection and Adjustment Press the , buttons to resetimmediately.Main menu Sub menu DescriptionTo choose the langu
20On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an itemusing the OSD system. Listed
21On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionNORMALSelect this when you want to use the productin the most general
22On Screen Display(OSD) Selection and Adjustment Main menu Sub menu DescriptionChange the input image signal ratio tooriginal. WIDEORIGINALSwitch to
23TroubleshootingNo image appearsCheck the following before calling for service.No image appearsDo you see a "OSD LOCKED" message on the scr
24TroubleshootingDisplay image is incorrect● Display Position isincorrect.● On the screenbackground, verticalbars or stripes arevisible.● Any horizont
25Display image is incorrectTroubleshooting● The screen color ismono or abnormal.● The screen blinks.• Check if the signal cable is properly connected
26Specifications W1946T/W1946TN47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coat
27Specifications W1946S/W1946SN47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coa
28Specifications W2046T50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coati
2Important PrecautionsOn InstallationDo not allow anything to rest upon or roll over the power cord, and do not place thedisplay where the power cord
29Specifications W2046S50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coati
30Specifications W2246T54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coati
31Specifications W2246S54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coati
32Specifications W2346T58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating
33Specifications W2346S58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating
34SpecificationsPreset Modes (Resolution)Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)*Recommend ModeDisplay Modes (Resolution
35SpecificationsIndicatorOn ModeSleep ModeOff ModeWhiteWhite BlinkingOffLED ColorMODEDisplay Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq.
36Installing the Wall mount plateWall mount plate(Separate purchase)This is stand-type or wall mount type and isconnectable with Wall mount plate.Plea
Digitally yours
Important Precautions3On CleaningUnplug the display before cleaning the face of the display screen.Use a slightly damp (not wet) cloth. Do not use an
4Accessories!!! Thank for selecting LGE products !!! Please make sure the following items are included with yourmonitor. If any items are missing, con
Connecting the Display5Before setting up the monitor, ensure that the power to the monitor, the computersystem, and other attached devices is turned o
6Connecting the Display..Disassembling the stand1. Put a cushion or soft cloth on aflatsurface.3. Change your lock on the product as it follows and tu
7Connecting the Display4.Pull out the Stand to remove.5.Pushing the PUSH button, Take the stand body from hinge body.Good Position Bad PositionWarning
8Connecting the DisplayBefore setting up the monitor, ensure that the power to the monitor,the computer system, and other attached devices is turned o
Comments to this Manuals